1) acrylate copolymer

　　丙烯酸酯共聚物

　　1.

　　The dispersion effect of acrylate copolymer binder consisted of butyl acrylace(BA) and acrylic acid (AA) on red pigment cake PR48: 2 was studied.

　　研究了亲水型丙烯酸酯共聚物连接料直接对红颜料PR48:2滤饼分散性能的影响。

　　2.

　　From investigating the properties and raw materials of AD adhesive for dry lamination and synthesis technology of acrylate copolymer, we can draw the conclusion that along with the cost of AD adhesive reduced by 20—30%, its properties can reach or even be superior to those of common polyurethane adhesives for dry lami-nation.

　　本文研究了AD干式复合胶粘剂(干复胶)的性能和单体组成,丙烯酸酯共聚物的合成工艺以及成份之间的相互关系。

　　3.

　　In this paper,IR and X-ray diffraction are used to investigate the mechanism of starch modified by acrylate copolymer (methyl methacrylate/buty1 acrylate/B-hydroxyethyl methacrylate).

　　利用红外光谱、X -射线衍射分析对丙烯酸酯共聚物 (MMA/BA/HEMA)改性淀粉反应的机理进行初步探讨 。

　　2) acrylic copolymer

　　丙烯酸酯共聚物

　　1.

　　Study on surface characteristics of modified reaction products of polysiloxane and acrylic copolymers;

　　聚硅氧烷-丙烯酸酯共聚物互改性产物的表面特性

　　3) acrylate copolymers

　　丙烯酸酯共聚物

　　1.

　　IR, UV and DSC analyses were used to characterize the interaction of the acrylate copolymers with the titanium chelate(Ti-Ac).

　　用红外光谱、紫外光谱、差示扫描量热等手段表征了掺杂体系内钛螯合物(Ti Ac)与丙烯酸酯共聚物的相互作用。

　　4) acrylate

　　['?krileit]

　　丙烯酸酯共聚物

　　1.

　　Using high resolution 13 C, 1H NMR combined with GC/MS and IR, the comprehensive analysis results of the clear coating show that the new type automobile coating is mainly composed of the copolymer contained butyl acrylates and 1,2 propanediol acrylate and the crosslinker butylated melamine formaldehyde resin, which can be solved in a few kinds of organic solvents.

　　罩光清漆的色谱质谱 (GC/MS) ,13 C ,1H液体高分辨核磁共振 (NMR)和红外光谱 (IR)等多种方法的综合分析结果表明 ,新型汽车涂料主要是由丙烯酸丁酯 ,丙烯酸 1,2 丙二醇酯等形成的丙烯酸酯共聚物和部分丁氧基化的三聚氰胺甲醛树酯交联剂所组成 ,它们溶解在由多种有机溶剂组成的混合溶剂中 。

　　5) Acrylates copolymer

　　丙烯酸-丙烯酸酯共聚物

　　6) acrylic ester-acrylonitrile copolymer

　　丙烯酸酯-丙烯腈共聚物

　　补充资料：丙烯腈苯乙烯丙烯酸酯共聚物

　　分子式：

　　CAS号：

　　性质：使丙烯酸酯橡胶呈微粒状分布于丙烯腈与苯乙烯共聚物基体中而得的共聚物。有更好的耐低温冲击韧性和耐候性、耐环境开裂性。能承受长期动态和静态载荷。但不耐芳烃、氯代烃、酯、醚和酮类溶剂作用。拉伸强度28～39MPa，弯曲模量1510～1730MPa，悬臂梁缺口冲击强度427～534J/m。热变形温度85～88℃。通常先制成聚丙烯酸酯乳液，再加苯乙烯和丙烯腈进行接枝共聚制得。主要用于汽车外饰件，农机部件、管材及路标等。还可用于制造多种塑料合金。